Alarm Output and Fire Control Extended Panel C-LT2000

Alarm Output and Fire Control Extended Panel (Enhanced)

Model: C-LT2000

Overview:

† The Alarm output & Fire Control Extended Panel is one of the access controller’s add-on modules.

† With the software settings, it is mainly used to provide burglar alarm, smoke gas temperature alarm, SOS alarm, fire and alarm signal output.

† The module has the characteristics of strong practicability, simple interface, and stable design performance.

† With its power and relay indicators, it can indicate the communication failures. It is a good cost performance module.

Module Characteristics:

† Available with four-way alarm output, it can be freely defined to one door or several doors of the controller.

† It can be connected to the burglar alarm, smoke gas temperature alarm, SOS alarm, etc. The output state of each way alarm can be defined freely through the software to be NO or NC.

† It can be connected to the fire control closed signal output. After receiving the fire protection signal, all doors of the controller will be opened automatically. And one fire protection alarm record will be generated for the inquiry after the event.

† It can control invalid break in alarm, longtime unlocking alarm, intimidation break in alarm, unlocking linkage output, invalid card alarm, integrated fire control alarm, etc.

† The anti-intimidation password can be changed.

† The time of unlocking alarm can be set between 0--- 6000 seconds.

† The delay hold-up time of each way output can be set between 0--- 6000 seconds.