Fiber Optic 8/10-bit Digitally Encoded 1 Video with 1 Data Transmission System
Model: C-FX1V1D Series
Desriptions:
Transition Network’s Analog Video + Data TX and RX units transport analog composite video and data simultaneously over multimode or single mode fiber. The TX device receives the video output from the camera and transmits it over the fiber. In addition, the TX device receives the data stream over fiber and transmits it to the camera to control PTZ functionality. The RX device receives the video signal on fiber and converts it back to an analog composite video stream and outputs the video on coaxial cable to the monitor. In addition, the RX device receives the data stream from the PTZ controller and transmits it over the fiber to the other end of the link.
All the conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired quality of video’s contrast and brightness for extended distance. No field adjustments are necessary.
Features:
◆ 8Bit/10Bit Digitally Encoded Modulation
◆ NTSC, PAL, SECAM Compatible
◆ SMT and Surface Mount Technology
◆ Industrial Grade Design
◆ Lightening-proof Up to 4,000V
◆ Overload and Short Circuit Protection
◆ Anti-Electromagnetic
◆ Signal Status Intelligent Indication
◆ ST, FC Optical Connector
◆ 10db Budget with 50/125μ
◆ 13db Budget with 62.5/125μ
◆ 1-year Warranty
Ease of Operation:
◆ Free-standing and Rack-mounted Optional
◆ Hot Swappable Rack-mount Cards
◆ Automatic Resettable Fuses
◆ Highest Optical Dynamic Range
Video Performance:
◆ Sampling Resolution: 8Bit/10Bit PCM
◆ Sampling Frequency: 15MHz
◆ Output/Input Signal Levels: 1.5Vp-p 75 Ohm
◆ Input Overload Level: 1.5Vp-p 75 Ohm
◆ Input Bandwidth: 5Hz ～ 8MHz
◆ Video In/Output Impedance: 75 Ohm (Unbal)
◆ Differential Gain: ≤1% (Typical)
◆ Differential Phase: ≤1° (Typical)
◆ S/N (Signal to Noise Ratio): ≥ 70dB (Weighted)
Data Performance:
◆ Data Format: RS485 (PTZ) (Simplex)
◆ Data Rate:
● RS232-120kbps/300kbps
● RS422-120kbps/300kbps
● RS485-120kbps/300kbps
◆ Bit Error Rate: < 10^-13
◆ Lightening-proof: 4,000V
◆ Interface: 5 PIN Plugabble Terminal Block
Electrical Performance:
◆ Power Voltage (M): 5V DC or 6V DC
◆ Power Voltage (I): 9V DC
◆ Power Supply (M): 2W or 2.5W
◆ Power Supply (I): 120W (Max)
◆ 2 Power Protections: Optional
Optical Performance:
◆ Input/Output Wavelength:
● SM 1310nm/1550nm
● MM 850nm/1310nm
● CWDM 1270nm ～ 1610nm
◆ Output Power:
● 0dBm ～ -5dBm
● -8dBm ～ -15dBm
◆ Sen (Receiver Sensitivity): > -36dBm
System Performance:
◆ MTBF (Mean Time Between Failure): > 120,000 hours
◆ LED Indication:
● Power LED
● Video LED
● Data LED
● Optic Link LED
◆ EMI (Electron-Magnetic Interference): Standard GJB151-97,SC
◆ Operating Temperature: -40°C ～ +74°C
◆ Operating Humidity: 0 ～ 95% (Non-condensing)
Machine Performance:
◆ Free-standing: 118mm(L) × 88mm(W) × 28mm(H)
◆ Rack (slots): 172mm(L) × 128mm(W) × 28mm(H)
◆ Rack Standard: 19’’ × 3U
◆ Material: Aluminum Alloy
◆ Color: Iron grey
Applications:
◆ Smart Buildings
◆ Security and Surveillance
◆ Intelligent Transportation System (ITS)
Order Information:
◆ Multi-mode:
● C-FX1VMA Digital 1 Channel Video; (2km; 1310nm)
● C-FX1V01DMA Digital 1 Channel Video with 1 channel Reverse direction Data (PTZ); ( 2km; 1310nm)
◆ Single-mode:
● C-FX1VSA Digital 1 Channel Video; (20km; 1310nm)
● C-FX1V01DSA Digital 1 Channel Video with 1 channel Reverse direction Data (PTZ); ( 20km; 1310nm/1550nm)
● TO complete part # add: ex: C-FX1VSAM = Free-standing; C-FX1VSAI = Rack-mounted
● M = Free-standing; I = Rack-mounted
|
