Fiber Optic C-FX4V2A1D-E Series

Fiber Optic 8/10-bit Digitally Encoded 4 Video with 2 Audio, 1 Data, 1 Ethernet Transmission System

Model: C-FX4V2A1D-E

Descriptions:

Transition Network’s Analog Video + Data (Audio; Ethernet) TX and RX units transport analog composite video and Data (Audio; Ethernet) simultaneously over multimode or single mode fiber. The TX device receives the video output from the camera and transmits it over the fiber. In addition, the TX device receives the Data (Audio; Ethernet) stream over fiber and transmits it to the camera to control PTZ (Audio device and computer) functionality. The RX device receives the video signal on fiber and converts it back to an analog composite video stream and outputs the video on coaxial cable to the monitor. In addition, the RX device receives the Data (Audio; Ethernet) stream from the PTZ controller (Audio device and computer) and transmits it over the fiber to the other end of the link. 

All the conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired quality of video’s contrast and brightness for extended distance. No field adjustments are necessary.

Features:

◆ 8Bit/10Bit Digitally Encoded Modulation

◆ NTSC, PAL, SECAM Compatible

◆ SMT and Surface Mount Technology

◆ Industrial Grade Design

◆ Lightening-proof Up to 4,000V

◆ Overload and Short Circuit Protection

◆ Anti-Electromagnetic

◆ Signal Status Intelligent Indication

◆ 600, 10k, 47k Ohm Unbalance or Balance

◆ 10db Budget with 50/125μ

◆ 13db Budget with 62.5/125μ

◆ 36db Budget with Single-mode Fiber

◆ 20km (SM) & 2km (MM), Max to 100km

◆ 1-year Warranty

Ease of Operation:

◆ Free-standing and Rack-mounted Optional

◆ Hot Swappable Rack-mount Cards

◆ Automatic Resettable Fuses

◆ Highest Optical Dynamic Range

Video Performance:

◆ Sampling Resolution: 8Bit/10Bit PCM

◆ Sampling Frequency: 15MHz

◆ Output/Input Signal Levels: 1Vp-p 75 Ohm

◆ Input Overload Level: 1.5Vp-p 75 Ohm

◆ Video In/Output Impedance: 75 Ohm (Unbal)

◆ Differential Gain: ≤1% (Typical)

◆ Differential Phase: ≤ 1° (Typical)

◆ S/N (Signal to Noise Ratio): ≥ 70dB (Weighted)

Data Performance:

◆ Data Format: RS485 (PTZ) (Simplex)

◆ Data Rate:

● RS232-120kbps/300kbps

● RS422-120kbps/300kbps

● RS485-120kbps/300kbps

◆ Bit Error Rate: < 10^-13

◆ Lightening-proof: 4,000V

◆ Interface: 5 PIN Plugabble Terminal Block

Audio Performance:

◆ Interface: 5 PIN Plugabble Terminal Block or AV Connector

◆ Input/Output:

● 600 Ohm Unbalance/Balance

● 10k, 47k Ohm Unbalance/Balance

◆ Input/Output: -6dBm ～ +6dBm

◆ Frequency: 10Hz ～ 20kHz

◆ S/N (Signal to Noise Ratio): > 60dB (Weighted)

Ethernet Performance:

◆ Interface: RJ45 Connector (With LED Indication)

◆ Mode: 10M/100M (Auto Adapt)

◆ Standard: IEEE 802.3/802.3U

◆ Function: Feedback diagnose

Optical Performance:

◆ Input/Output Wavelength:

● SM 1310nm/1550nm

● MM 850nm/1310nm

● CWDM 1270nm ～ 1610nm

◆ Output Power:

● 0dBm ～-5dBm

● -8dBm ～-15dBm

◆ Sen (Receiver Sensitivity):

● above -24dBm (Video)
● above -24dBm (Ethernet)
● above -36(D)dBm (Data)
● above -36(D)dBm (Audio)

Electrical Performance:

◆ Power Voltage (M): 9V DC

◆ Power Voltage (I): 9V DC

◆ Power Supply (M): 2W or 2.5W

◆ Power Supply (I): 120W (Max)

◆ 2 Power Protections: Optional

System Performance:

◆ MTBF (Mean Time Between Failure): > 120,000 hours

◆ LED Indication:

● Power LED

● Video LED

● Data LED

● Optic Link LED

● Ethernet LED

◆ EMI (Electron-Magnetic Interference): Standard GJB151-97,SC

◆ Operating Temperature: -40°C ～ +74°C

◆ Operating Humidity: 0 ～ 95% (Non-condensing)

Machine Performance:

◆ Free-standing: 205mm(L) × 135mm(W) × 33mm(H)

◆ Rack (slots): 172mm(L) × 128mm(W) × 28mm(H)

◆ Rack Standard: 19’’ × 3U

◆ Rack: Number=18 slots

◆ Material: Aluminum Alloy

◆ Color: Iron grey

Applications:

◆ Smart Buildings

◆ Security and Surveillance

◆ Intelligent Transportation System (ITS)