In the windy, rainy, cold and hot environment, can the factory turnstile be on the site and withstand the “destruction'? Are you satisfied with your factory turnstile? Let's discuss what is the 'ideal' factory turnstile?

What is the working environment of the factory turnstile?

The factory turnstile is generally used outdoors in the open air or under a canopy. It will suffer wind, sand, rain and snow, so it’s waterproof and dustproof abilities are very important.

The temperature of the four seasons changes greatly. The summer is hot, and the winter is cold. In order to cope with different seasons, the turnstile needs to have heat and cold resistance.

In some places, the temperature difference between day and night is very large, and condensation is easy to form inside the turnstile, which may lead to the damage of electrical components. So the turnstile needs to have the ability to prevent condensation.

Some factories are in a corrosive environment and the corrosive substances may be solids, liquids, gases, etc. For example, chemical plants, near the sea, etc. The turnstiles used there need anti-corrosion treatment.

What management problems does factory turnstile face?

In many factories, workers ride bicycles and motorcycles to work. It is easy for bicycles and motorcycles to hit the turnstile, causing damage to the swing gate and the turnstile’s mechanism. So, the turnstile should not only be shared by pedestrians and cyclist, but also be able to withstand the impact.

Factory has a large number of workers and large population mobility.

Access to different areas is restricted and checkpoints are required to prevent unauthorized access.

Each system can be used independently and cannot do timely linkage management. It should be connected with other systems to build 'Internet of things' management.

Some factories have higher requirements on anti-static, and workers shall conduct anti-static inspection before entering the workshop.

With the development of AI, big data and other technologies, pedestrian access management is developing towards intelligence.

In order to solve the above problems, what requirements should the factory turnstile meet?

The factory areas to install the turnstile are main entrance, workshop and office area. According to the specific use environment and application requirements, CMOLO can customize comprehensive solutions for customers.

▲ Outdoor Turnstile IPW-PM1000

▲ Outdoor Tripod Turnstile CPW-400D

▲ Pedestrian Turnstile CPW-119Y

▲ Outdoor & Indoor Flap Barrier Turnstile CPW-331TBS

▲ Sliding Gate Turnstile CPW-331EGS

How strong is the outdoor turnstile IPW-PM1000?

Outdoor turnstile IPW-PM1000 is developed by CMOLO specifically for outdoors, which can fully meet all kinds of complex needs for outdoor.

IP65：：The whole turnstile is designed with waterproof and dustproof both inside and outside, which is completely suitable for outdoor.

Violence resistance: With the elastic swing gates and unique mechanism structure design, the mechanism can withstand more than 5 times the impact of ordinary mechanism, and the gate can sustain frequent violent hitting without damage to the mechanism.

Shared by pedestrians and cyclist: The lane width can be customized to 1m~2m, to allow people, bicycles, motorcycles, wheelchairs, baby carriages, trolley to pass.

Low temperature resistance：reinforced parts and temperature control system are used, and the minimum temperature that the turnstile can withstand is -20℃.

High temperature resistance: It can withstand up to 60℃.

Sunlight resistance: The infrared sensor structure is adopting matrix distribution and avoiding direct sunlight design, which can reduce the interference from sunlight to avoid false alarming.

Condensation resistance: Add heater inside the cabinet to reduce the temperature difference between day and night and prevent condensation.

Corrosion resistance: If it is applied in corrosive environment, corrosion resistant materials (such as 316 stainless steel) are needed, and do anti-corrosive treatment (such as baking finish & electroplating).

Long life: MTBF of 10 million times

Intelligence: It can be integrated with face recognition system, without sense of access.

Strong compatibility: The turnstile system can be seamlessly connected with the access control system, attendance system, visitor system, etc., to achieve the linkage management of IOT in the factory, which helps the collection and analysis of access data to make plan management.

Which strong factories does the outdoor turnstile IPW-PM1000 be used in?

All the factory cases are unable to be listed here, so just list partial cases~~ More cases, please contact CMOLO.

▲ Baogang Group-Outdoor Turnstile IPW-PM1000

▲ Ansteel-Outdoor Turnstile IPW-PM1000

▲ Xinjiang CNPC Dushanzi Petroleum Corp.-Outdoor Turnstile IPW-PM1000

▲Tianjin Siemens-Outdoor Turnstile IPW-PM1000

▲ China Aerospace Science and Technology Corporation-Outdoor Turnstile IPW-PM1005

With the mature development of AI, big data, IOT and other technologies, the factory management tends to be intelligent and instrumented. Face recognition turnstile can more accurately recognize the identity of the pedestrian, to ensure the safety management of factories. The linkage management between various management systems in the factory can build an integrated management system more effectively, and improve the level of safety prevention and control. CMOLO factory turnstile will also keep pace with advanced technology, to create more surprises for users, provide better factory turnstile and services with core competitiveness, and help the factory to build intelligent pedestrians access management.