Pedestrian turnstiles have become ubiquitous in our lives and become a good alternative to replace manpower. It takes a lot of convenience to people's lives. To ensure the people’s safety and excellent user experience, CMOLO pays attention to every detail of the turnstiles, and is committed to creating safe and excellent turnstiles for every occasion.

With “artisan heart”, we are putting 100% energy to study each turnstile details deeply and create pedestrian turnstiles. Since its establishment 12 years ago, CMOLO has been focusing on the turnstiles and has made great breakthroughs in this field.

▲ CMOLO Pedestrian Turnstiles

“What effects did CMOLO do to present such wonderful turnstiles?”

We have always insisted on only one product--Turnstile. Our core value is providing excellent turnstiles. To ensure the perfect quality of the turnstiles delivered to the customer, our control of the details runs through the entire process of the pedestrian turnstile from design, development, supply chain, parts processing, assembly, testing to packaging. 

01 Design

According to the ergonomic design, the user's comfort level is excellent in terms of the height of the cabinet, the position and angle of the LED indicator, the identification module, the display screen, and the color tone etc. In terms of design, we not only pay attention to practicality, but also to the sense of art, and produce a lot of beautiful turnstiles.

02 Research & Development

There is a difference between the turnstiles and the turnstiles. The high quality is built on the high cost. CMOLO insists on “good quality” products. We invest a lot of resources in research and development to achieve two key points of stability and innovation. R&D is the central point and the starting point. R&D is fundamental, and we have set strict standards for every aspect of turnstiles to make sure each link is perfect.

03 Supply Chain

We have a dedicated team to strictly control every aspect of the supply chain, control product quality from the source, and ensure that each finished product is a boutique.

04 Accessories Processing

We set strict process standards for each process, and outsource processing, and the finished products will be inspected to ensure that each accessory meets our requirements. Is there a big difference between the high standard and the low standard produced turnstiles? Of course big.

We use several procedures below to illustrate what kind of effect can be achieved by high standard process production.

About the welding of the turnstile cabinet, we use full welding, which is uniform, smooth and beautiful. There will be no deformation, cracks, virtual welding etc. The advantage of full welding is that the joint strength of the welded parts is large and there is no problem of breakage; the sealing is better, and the waterproof and dustproof ability is stronger.

▲ Pedestrian Turnstiles’ Cabinet Welding

The brushed effect on the surface of the cabinet reaches the same thickness and uniformity, and the surface is bright and tidy. The texture is very good regardless of the distance or the near view.

▲ Pedestrian Turnstiles’ Cabinet Brushed Processing

We will not ignore the invisible places. We will use the R0.3 standard to round the corners of the cabinet and accessories. The sheet metal part that is easy to contact inside the cabinet is also treated with a flop and rounded corner to avoid scratching.

In addition to stainless steel, the internal parts are all nickel-plated to enhance the anti-rust ability of internal parts.

In terms of accuracy, there are very high requirements. For example, for laser cutting:

①linear length is guaranteed to be within 0.3mm; ② aperture accuracy is controlled within 0.2mm. The accuracy of the gouging should be within 0.2mm.

In terms of gaps, in order to reduce the splicing gap, although it will increase the cost, we still use the V-groove technology to first gouging and then bend it. This will make the R angle smaller, the bend will be closer to the right angle, and the stitching gap will be smaller. The smaller the gap, the more beautiful the whole machine.

05 Assemble

The assembly affects not only the appearance, but also the quality of the turnstiles. Even a slight deviation will affect the service life of the turnstile. Therefore, we strictly control the accuracy of the assembly. For example, the gap between card panel, senor cover panel, LED indicator panel and the stainless steel plate is less than 0.4mm, which could be ignored.

▲The gap between card panel and stainless steel is less than 0.4mm.

The gap between the stainless steel plates is less than 1.0 mm, and some places are even controlled at 0.5 mm, and the gap is uniform. The smaller the gap, the more refined and beautiful the joint texture.

▲The gap is less than 1.0mm.

Strength determines the details, and details determine success or failure. CMOLO has not let go of any details, and the perfect details still depend on strength and experience. We believe that we will persist in the details of the pedestrian turnstiles, and we will continue to create new heights in the future.