Full Body Turnstile

Full Height Turnstile Benefits and Features

The full body revolving gate is a physical barrier that keeps people safe and controls the movement of people in and out of buildings. The full body revolving gate is taller and has a stronger closure than the half-height revolving gate. This makes it harder for anyone to climb over, tailgate or break in. The best thing about it is that it provides very high levels of security, which allows for access management in all kinds of weather and situations.

The gate contains a high-precision mechanical gearbox and a sophisticated control system that makes it work smoothly and last a long time. The design can be used for one-way or two-way control and can be connected to multiple identity verification methods, like card swiping, QR codes, fingerprints, and facial recognition, to satisfy the needs of diverse places. The full-body revolving gate moves at a moderate speed, which keeps people from getting too close to each other and causing safety problems.

The product is also waterproof, dustproof, energy-saving, low-noise, and easy to maintain. These features not only make the entrance and exit safer, but they also provide the usage site a clean and professional look.

full height security turnstile material

The main material is high-quality 304 or 316 stainless steel with a brushed or mirror finish. It is resistant to corrosion and oxidation, making it appropriate for long-term use indoors and outdoors.

The rotating frame is made of welded high-strength stainless steel pipes that can handle heavy use and impact from the outside.

Internal parts: have bearings that don't wear out, precise motors, and a smart main control board to make sure they work well for a long time.

Treatment for looks: The surface is polished or sandblasted to give it a stunning and elegant look that fits nicely with modern buildings.

full height pedestrian access gate installation and debugging

Basic construction: To make sure the installation area is sturdy and reliable, follow the design drawings to pre-embed anchor bolts and power cables.

Fixing the main body: Lift the full body of the rotating gate to the right place and use the anchor bolts to hold it in place. Make sure it is level both horizontally and vertically.

Electrical connection: Connect the control system and power supply, and connect to access control systems, identifying devices, or fire protection systems.

Debugging the function: Test the motor, brake mechanism, sensor sensitivity, and other things by sending traffic in one direction and then sending it back in the other direction.

Acceptance and training: After the overall debugging is done, do a trial run and give the user training on how to use the system and how to keep it running.

Most of the time, a professional team does the installation and troubleshooting to make sure the equipment works safely, reliably, and efficiently.

FAQ

Q1: What is the difference between a revolving gate that goes all the way around and one that only goes halfway up?

A1: The complete body revolving gate is taller and more closed in, which makes it less likely to tip over and safer, therefore it is good for situations that need a lot of protection.

Q2: Is it possible to leave the gate outside for a long time?

A2: Yes, it is constructed of 304 or 316 stainless steel, which is quite good at keeping water and corrosion out and works well in a lot of different outdoor settings.

Q3: What kinds of access control systems can be integrated?

A3: It works with a lot of different systems, like card swiping, QR codes, fingerprints, and facial recognition. It also lets you customise how it works with other systems.

Q4: Is it still possible for the gate to open after a power outage?

A4: The device features an automatic unlocking feature that turns off the power to make sure that people can get out quickly in an emergency.

Q5: Is it hard to keep up with everyday maintenance?

A5: Easy to keep up with. To make sure long-term stable functioning, all you need to do is clean the stainless steel surfaces and check the mechanical and electrical control systems on a regular basis.