Office Security Turnstiles Digital

Features and benefits of the office security turnstiles

 

1. Control of high security

The office security turnstiles digital has a design that combines mechanical and electrical control. It can work with access control systems, facial recognition, IC/ID cards, QR codes, fingerprint recognition, and other systems without any problems. Unauthorised people can't get in by force, which stops tailgating and keeps office workers safe and information private.

2. Strong and long-lasting structure

The primary structure is largely comprised of 304 stainless steel, which is good at preventing rust, corrosion, and damage from impacts. Can be used in a variety of indoor and outdoor settings. It has a service life of more than 10 years and will work well for a long time.

3. Looks modern and stylish

The revolving gate has smooth lines and a basic, elegant look that goes well with the design of current office buildings. It can improve the company's image and show that it has a high degree of intelligent office administration.

4. High efficiency of traffic

It can be used by one person at a time or in batches, and the spinning speed can be changed. It can keep traffic flowing smoothly at busy times, avoiding crowds and traffic jams.

5. Smart anti-pinch and alarm feature

The built-in smart infrared sensor and mechanical anti-pinch mechanism can keep people from getting pinched. There will be an automatic sound and light alarm if someone breaks in, follows someone too closely, or goes the wrong way.

6. Installation and maintenance in parts

The office security turnstiles digital has a modular structure that makes it easier to take apart and fix, which lowers running expenses in the long run. The maintenance port is in front of or above the equipment and can be fixed without having to move the whole machine.

 

office turnstiles Flow of the production process

 

1. Choosing and checking the materials

We choose high-quality 304/316 stainless steel pipes, laser-cut parts, electronic control components, and other raw materials. We also do stringent inspections of all incoming materials to make sure that the quality of the products is regulated from the start.

2. Machining with precision

Modern processing tools like CNC machine tools, laser cutting machines, and welding robots are used to execute precision machining on different parts of the door body. This makes sure that every inch of the structural size fits exactly and has great mechanical correctness.

3. Treating the surface

Wire drawing, electrolytic polishing, sandblasting, or an anti-fingerprint coating are used to treat the surface of stainless steel. These processes improve its capacity to resist dirt and improve its appearance and texture. They also make it more resistant to corrosion.

4. Putting together the electronic control system

The system is put together and programmed using robust and mature control motherboards, motors, driver modules, communication interfaces, and other parts to make sure the gate works smoothly and the system responds quickly.

5. Putting together and testing the whole machine

After going through many rounds of assembly and testing, such as electrical debugging, durability testing, fault detection, and so on, each piece of manufacturing equipment is guaranteed to meet high operational standards.

 

turnstile office Usage and installation steps

 

Before you install, get ready:

Check the ground level on site and make sure there are enough power and control lines.

Look over the list of equipment and make sure that all the extras are there.

Professionals will handle the technical training and programme confirmation.

Here are the steps to install it:

Basic positioning drilling: make a mark on the ground and drill holes for the expansion screws.

Putting the main part of the gate in place: Put the whole machine or modular parts in the right place for installation.

Fixed equipment base: Use bolts to hold the equipment down so it doesn't move about.

Electrical control wiring connection: Connect the power line, the access control line, and the communication line. Then, make sure the circuit is clear and has no problems.

Test the electricity: Connect the power supply and see if the electronic control system is working properly.

Debugging system integration: Set access modes and integrate and debug systems for access control, attendance, and visitors.

Functional testing: Run a lot of tests on functions like passage, anti-pinch, and alarm to make sure everything works as it should.

FAQ

 

Q1: How many different ways can turnstile office be used to get through?

A1: It can employ more than one type of identification, like an IC card, ID card, facial recognition, QR code scanning, fingerprint recognition, and more.

Q2: Can office security turnstiles still open if the power goes out?

A2: Yes, the device has an emergency battery and a power-off automatic unlocking capability. This means that if the power goes out, it will immediately unlock so that people may get through.

Q3: Is it possible to change the direction or function after installation?

A3: Yes, the system is modular, so you can change the direction of flow and permissions from anywhere.

Q4: Are there any rules about how much weight the ground can hold?

A4: To make sure the gate works well for a long time, the ground should either be a concrete foundation or a structure that can hold at least 300 kg.

Q5: Is it hard to take care of posts?

A5: Maintenance is rather easy, and the modular design makes it easy to switch out parts quickly. Technical documentation supports core parts such control boards and drive motors.

If you are selecting for office turnstiles or new construction projects, please feel free to contact us for professional technical solutions and customized service support.