Tandem Turnstile

Features

 

1. Dual structure

The double-link structural architecture of the double-link revolving gate is its most obvious characteristic. With two doors opening alternately, this arrangement greatly increases personnel passage efficiency. Particularly suited for locations with high personnel flow, the dual structure can allow two persons passing through at the same time, hence lowering waiting time for staff, unlike conventional single-leaf revolving gates.

Dual revolving gates help improve system safety, in addition to traffic efficiency. Through both doors at once, only authorized staff members can access and leave. The access control system guarantees that just one authorized individual passes through each time using precise control mechanisms and sensors; therefore, it eliminates tailgating. Higher stability and protection performance are two further benefits of the twin link architecture. Conventional single-leaf doors, susceptible to impact or external elements, lack the stability that double-link gates offer.

 

2. Stability and durability

The tandem turnstile is made of premium stainless steel or aluminum alloy materials with great corrosion and compression resistance. These components not only guarantee the long-term reliable operation of the access control system but also efficiently manage demanding exterior situations, ensuring the durability of the door body. Particularly in outdoor or high-temperature and high-humidity surroundings, the great material of the dual-lane turnstile can efficiently extend its service life and lower damage caused by external surroundings or changing weather.

Furthermore, the dual rotating gate's mechanical transmission system has been meticulously built to guarantee its effective performance even after extended usage, lowering the failure rate. Important parts like the gate's door leaf structure and rotating shaft can efficiently preserve stability even in high-frequency operation, therefore preventing malfunctions or performance degradation brought on by too great wear and tear.

 

Maintenance

 

The double revolving gate's design gives daily use and maintenance much thought. First of all, the door's surface is easy to clean for daily use since it consists of smooth, anti-fouling materials. The gate is built with specific maintenance interfaces for parts that need regular maintenance, such as sensors, transmission systems, etc., enabling maintenance staff to rapidly check and service the equipment, lowering equipment downtime.

FurtherAdditionally, included in the dual rotating gate is an intelligent self-diagnosing system capable of real-time monitoring of the equipment's operational state. If an effect or irregularity occurs, the system will automatically sound an alert and display a fault code, allowing maintenance staff to quickly identify and resolve the issue. This design lessens the complexity of hand inspection and considerably increases the equipment's maintenance efficiency.

The sophisticated control technology also lets users watch the gate at any time and remotely monitor and regulate its operating state using devices like PCs and cell phones. This humanized design makes access control administration more intelligent and considerably increases user convenience.

 

Usage and installation steps

 

Installation guidelines:

Work on preparation: Measuring the installation environment helps guarantee that the installation point is level, stable, and satisfies safety criteria before installation.

EqInstallation buiAAssEmbly: Assemble the twin turnstile gate, component by component, following the installation guidelines. It is essential to verify that every component, especially the transmission system and door body, is in excellent condition during the assembly process.

Link control of power supply and system: Connect the control system to the electronic components of the gate and match the power supply to the product handbook. This stage calls for guarantees of the stability of electrical connections.

After installation, execute system debugging covering the opening and closing of door panels, sensor sensitivity, and control system response to guarantee normal system functioning.

Multiple pass tests are carried out to guarantee that the dual-entry turnstile can run under high flow conditions when debugging is finished.

Simple and standardized design of the dual rotating gate during the installation process helps to prevent complicated operational processes and too many installation staff, therefore reducing the installation time. Generally, one day is sufficient to complete the entire installation process.

 

Production Process Flow

 

We produce dual rotating gates using several precisely timed procedures to ensure the final result is of great quality and stability. The double rotating gate is produced mostly as follows:

Choosing and testing the materials is the first step in the production line. Strict quality testing of the materials-such as aluminum alloy and stainless steel-used in the double-door rotary gate guarantees conformity with pertinent standards. The quality control during the material-choosing process provides a strong basis for later production.

Mechanical processing involves chopping, stamping, welding, and other operations to create the gate's basic framework. We precisely machine each element to ensure accurate dimensions and smooth surfaces, particularly in the machining of the transmission system; reliable rotation of the door body is guaranteed using high-precision CNC equipment.

Surface treatment is: The gate's surface is first rust removed and anti-corrosion treated; then, surface glossiness and oxidation resistance are enhanced by spraying or electroplating techniques. Not only has the door body's appearance been improved, but its weather resistance and durability have also been much strengthened with this treatment.

We meticulously construct all produced components and first functionally test them during assembly and debugging. Special attention should be paid to the fit and stability of every component throughout the assembly process to guarantee that the door can still run without problems under a heavy frequency of usage.

TThe twin rotating gate will undergo rigorous quality testing during the final stage of manufacturing.hese tests wilThey These testThese tests These tests include, among others, door strength testing, transmission system operating stability testing, and functional testing of the electrical system. By means of thorough quality control, we guarantee that every double rotating gate satisfies international criteria.

Once manufacturing and testing are complete, we pack the product in accordance with various transportation requirements, ensuring its safety during transit. Eco-friendly materials, compliant with contemporary environmental criteria, compose every packaging element.

 

Promote products